Professor of Computational
Born in Nicosia Cyprus, 1952.
Studied in London (Queen Mary College), 1971-1977, ending with PhD.
Post-Doctoral Research Associate, University of London, 1978-1979.
CHAM ltd, Wimbledon, 1979-1989, (Head Consultancy Section 1987-89)
At University of Greenwich since 1989.
Chair of CFD since 1994
B.Sc. Aeronautical Engineering, Queen Mary College,
Ph.D., University of London for experimental research into oscillatory turbulent boundary layers (1978)
# not all current….
§ British Foundry Medal and Prize 2014 - awarded to authors of the best technical paper published in the Foundry Trade Journal for: Wang, H., Djambazov, G., Pericleous, K.A., Harding, R.A. and Wickins, M. (2013) Numerical modelling of the tilt casting process for γ-TiAl alloys, Foundry Trade Journal International, 187 (3705). pp. 150-157. ISSN 1758-9789
§ Best conference paper award: K Pericleous, G Djambazov, JF Domgin, P Gardin, B Lebon, "Time-dependent modelling and experimental validation of the metal flux interface in a continuous casting mould", Proc. 28th Int. ATS steelmaking days, 13-14 Dec. 2007, Paris, pp 207-217
§ Best conference paper award, "The Use of Combined DC and AC Fields to Increase Superheat in an Induction Skull Melting Furnace": R A Harding , M.Wickins , G. Keough , K. Pericleous , V. Bojarevics, International Symposium on Liquid Metal Processing and Casting, Santa Fe, USA, September 18-21, 2005
§ Director MPSL Ltd
§ Co-Director, Centre for Numerical Modelling and Process Analysis (CNMPA)
Editorial board of:
§ Applied mathematical Modelling (Elsevier)
§ Journal of Algorithms & Computational Technology (Multi-Science Publ. Co. Ltd)
§ Journal of High Temperature Materials and Processes (De Gruyter)
§ Grant reviewer for EPSRC, Leverhulme Trust, Cyprus Science Foundation
§ EU panel chair, member and proposal reviewer for: EU/FP6 NEST (New and Emerging Technologies), EU/FP6 IP Global 3, EU/FP6 Nanotechnologies & Nano-sciences Knowledge-based Multifunctional Materials (NMP), EU/FP6 STREP, FP7 IP ‘FIREPARADOX’
§ REF Output Assessor (2014)
§ Professor of Computational Fluid Dynamics, CMS School
Computational Science and Engineering (CSE) research group
Senior Postgraduate Tutor & Faculty Research Degrees Committee Acting Chair
Actively involved in the development of a number of CFD codes (some of which are commercially available). Broad interests in CFD and in particular in the areas of multi-physics modelling, two-phase Flow, CFD for complex reacting flows in Mechanical, Process, Chemical and Aerospace Engineering, MagnetoHydroDynamics (MHD) in metals processing, melting, casting, welding and alloy microstructure simulation, fluid-structure interaction and computational aero-acoustics.
Consultant to a number of organisations worldwide, including: Alcoa (US), ARBED (Lux), Arcelor (Fr.), BAe (UK), Comalco (Aus), Rio-Tinto (UK, Aus), Corus (NL), DNV(UK), Electrowatt (Switz.), Fire Research Stn. (UK), Lafarge (Fr), Mott-MacDonald (UK), Todd Combustion (USA), Rolls-Royce (UK), Xstrata-zinc(UK).
Last updated 01 May 2014
The content of these WWW pages does in no way reflect
the policies or opinions of the University of Greenwich. These WWW
pages are the sole responsibility of the author.
off-site pages that are referenced from these WWW pages remain
the responsibility of their respective authors. The links are
provided in good faith, but the author of these WWW pages takes no
responsibility for their content.
opinions offered by the author are offered in good faith, but
not necessarily in the role of an expert.